Why Is My Actiontec Modem Have To Turn Off And On Again To Get Wi Fi Service?

1. Lights description
2. Inputs description
3. Interface login
4. Wireless
5. Wireless SSID
6. Wireless password
7. Smart Steering
8. Disable wireless
9. Port forwarding
10. Hard reset

Actiontec T3200

• Wireless Air conditioning (802.11ac)
• Backward compatible for Wireless B/Yard/N
• ii.4 GHz & 5 GHz
• 4 Ethernet Ports (no Gig-E port)
• Remote HTTP access
• Supports speeds up to 1G

Understanding your Actiontec T3200's lights.

Your DSL modem has several lights which tin be used to run across current statuses, and diagnose installation and connection problems.

Cyberspace
-Solid Green: The device is powered on, continued to the DSL line and has an IP. Should be able to connection to cyberspace.
-Flashing Light-green: Attempting to institute DSL connectedness.
-Solid Bister or Solid Ruby-red = Either NO Train or Authentication Failure.
Specifically:
-Solid Amber or Solid Cerise with NO or Flashing DSL light/due south = NO TRAIN
-Solid Amber or Solid Ruby with SOLID GREEN DSL calorie-free/s = Authentication Consequence
-Solid Amber or Solid Cherry-red with NO WIFI calorie-free = The modem may be in Bridge Fashion

Wi-Fi
-Green: One or more wireless devices connected.
-Off: No Wireless device continued.

LAN i-four
-Green:   Ethernet port in utilise.
-Blinking green: Traffic passing.
-Off: Ethernet port non in use.

DSL 1
Flashing Light-green = Attempting to Train on 1st pair
Solid Green = 1st Pair Trained
Off = No pair detected

DSL 2
Flashing Green = Attempting to Train on 2nd pair
Solid Green = 1st Pair Trained
Off = No pair detected

Inputs

Green: Phone line
Grey: WAN port – used for non-DSL connections similar fiber optic.
Yellowish: Ethernet ports
Power: Ability string, only use provided power cord with this modem. If replacing a modem, never utilize the prior modem'south string.
USB: Not in use.

Modem Interface
Find all modem configurations hither including wireless settings and port forwarding.

How to get into the Interface:

Open your browser to: http://192.168.254.254
Username: admin
Password: The password is located on a sticker on the side of the modem. This password is dissimilar on every single T3200 modem.

Wireless Settings

Change your wireless network's name. (SSID)
i. From the Modem Interface, select the Wireless Setup icon at the top center of the screen.
two. Select which wireless band you lot want to work with. (2.iv or 5.0).
3. Clear out the SSID name field. This is where you or the customer would update the proper name of their wireless network.
4. Once the new SSID has been updated, select Employ down at the lesser and you should see the updated SSID.

Change the wireless password or security blazon.
1. From the Modem Interface, select the Wireless Setup icon at the top centre of the screen.
2. Select which wireless ring you want to work with. (2.four or 5.0).
3. The drop downs let you choose a few options for the security and encryption types. Recommended is security type WPA2 and Encryption Type AES.
4. Next to Security Key select Use Custom Cardinal/Passphrase.
5. Finally enter the new wireless password in the field right below Use Custom Key/Passphrase. Select Apply to salve settings.

To Disable Smart Steering:
1. Click the "Wireless Setup" Icon
2. Click the "SmartSteering" link
three. Select the "Disable" radio button
four. Click "Employ"

Disable wireless.
1. From the Modem Interface, select the Wireless Setup icon at the top center of the screen.
two. Select which wireless ring you desire to piece of work with. (two.four or five.0).
3. Click the dot past disable.
4. Click Apply at the bottom.

Port Forwarding
In estimator networking, port forwarding redirects a advice request from one address and port number combination to another.

Forwarding ports on the Actiontec T3200
one. From the Modem Interface, click Firewall on the top.
2. Click Port Forwarding on the left.
three. On the Port Forwarding screen, next to Select LAN Device choose the device yous wish to open up ports for.
four. Enter the port or port ranges needed for the device, then select Apply.
5. For multiple instances of ports open for a single device (Ex: Ports, eighty,53,443 etc.). repeat the procedure. You will see your configurations under the Applied Port Forwarding Rules section.

Manufacturing plant Reset
A factory reset volition take the modem back to manufactory settings. That clears all settings like personalized wireless names, passwords, and port forwarding, etc. Depending on the state of the modem, sometimes a hard reset volition restore services.
1. To reset, first find the reset pinhole in the back of the modem past the power cord. There is a small blood-red circle surrounding the reset pinhole.
two. Take a small pointy object (a toothpick or a prophylactic pivot is all-time) and press it into the pigsty and hold for xv seconds then release.
3. In one case the lights have stabilized cheque services once again.

Why Is My Actiontec Modem Have To Turn Off And On Again To Get Wi Fi Service?,

Source: https://www.windstream.com/Support/Internet-Security/Router-Wi-Fi/Actiontec-T3200

Posted by: merrillfrenjudipt.blogspot.com

Share this post